SOLAR PRODUCT CATALOGUE
Knox Latest Products Zapher Zynex and the Current Catalogue
Share on social media

A document-led look at Knox’s current Zapher, Zynex, Xenon, Xerox and Powerwall products, separating output, PV capacity and verified facts from launch claims.
Searching for Knox latest products brings up several inverter families, overlapping power numbers and batteries whose names can be mistaken for usable capacity. The current brand catalogue is more useful when read as a system-design shortlist rather than a launch announcement.
This review uses KNOX's knoxpv.com catalogue and linked technical documents. The KNOX site at knoxfzco.com directs product visitors to that domain. No dated manufacturer announcement was verified establishing the models below as October 2026 launches. They are products documented in the current public catalogue, not a claimed release sequence. [1][2]
Zapher three single phase options with separate PV ratings
The Zapher XZ-6.6kW-12000pV is rated at 6.6 kW AC output and 12 kW maximum PV power, not 12 kW AC. Its two trackers permit 21 A each; PV limits are 500 V open circuit and 120-450 V MPPT operation. [3]
The sheet lists a nominal 48 V battery interface, separate generator/AC input and IP65. Transfer is specified below 15 ms for one system and below 50 ms in parallel. Sensitive loads still need equipment-specific interruption checks. [3]
The larger Zapher models are XZ-9.2kW-16000pV and XZ-11.2kW-18000pV. Their datasheet pairs 9,200 W and 11,200 W rated output with maximum PV ratings of 16,000 W and 18,000 W respectively. Both are single-phase, nominal-48 V designs with two MPPT trackers and IP66 protection. [4]
The larger sheet specifies 27 A per tracker and maximum battery-discharge currents of 190 A and 210 A. It also gives transfer times under 20 milliseconds for home appliances and under 50 milliseconds in parallel. These models deserve consideration where measured simultaneous demand exceeds the smaller unit's capability. Their battery-bank requirements deserve equal attention: a high-output inverter cannot compensate for an undersized battery or BMS. [4]
Zynex a different option for divided roof arrays
The linked Zynex datasheet identifies ZX-3M-0816 and ZX-3M-1020, with 8 kVA and 10 kVA rated AC apparent power and three independent MPPTs. It specifies 16,000 Wp and 20,000 Wp maximum PV array power, IP54 protection and switching below 10 milliseconds. [5]
Three trackers can be useful when an installer needs separately managed roof sections. That is a design advantage to evaluate, not evidence that this family is universally better than Zapher. The permitted string voltage, current and power still have to work for each roof section. The datasheet, rather than a generic family description, should be attached to the quotation. [5]
Xenon and Xerox address different project types
For three-phase hybrid systems, KNOX documents Xenon 18000 and 22500 as 12 kW and 15 kW output models. Their PV limits are 18 kW and 22.5 kW; the sheet identifies a 48 V battery system, two MPPTs and IP66 protection. A three-phase home or business needing storage can examine these separately from the single-phase Zapher options. [6]
The Xerox G4 Pro 30K/45kpV is instead listed in the on-grid range. Its datasheet gives 30 kW rated active output, 45 kWp maximum PV array power and three independent MPPT inputs. That makes it relevant to a larger daytime-generation project, not an interchangeable substitute for a hybrid backup design. If backup is required, request a complete storage and islanded-operation design rather than relying on the Xerox power rating alone. [7]
Powerwall nominal energy and discharge current
KNOX's linked Powerwall 6.0 datasheet identifies model LIO 5.20-IP20 as a 51.2 V, 100 Ah LiFePO4 battery with 5,120 Wh nominal energy. The document specifies 100 A continuous discharge. The product name should therefore not be used as proof of 6 kWh stored energy. [8]
This is a particularly important check when pairing batteries with larger inverters. Energy capacity governs duration; allowable battery current constrains power. Ask for a model-specific compatibility statement, approved battery count, communication settings and usable-energy conditions. The same datasheet contains inconsistent parallel-count statements, so expansion plans need written clarification before purchase. [8]
What changed and what remains unverified
The Zapher files use July 2026 upload paths, but neither an upload directory nor promotional wording establishes a product launch date. [3][4]
There are also website-table problems worth avoiding. The Zapher 6.6 kW page places a wattage under a voltage heading; its linked PDF separates those quantities correctly. This review follows the model-specific PDF for the stated electrical ratings, while still recommending confirmation against the delivered unit. [9]
Documents to request before ordering
Ask the installer for five things:
- Exact model code, hardware revision and the matching current datasheet and installation manual.
- A string-design worksheet covering module voltage, current and temperature assumptions.
- Written battery/BMS compatibility and the battery bank's continuous and surge limits.
- Backup-load allocation, transfer requirements and any generator-integration conditions.
- Written warranty scope, service arrangements and an itemised installed quotation.
No live stock, local transaction price, independent performance test or recent-launch date is established here. The useful result is a clearer shortlist: Zapher for documented single-phase hybrid choices, Zynex when its three-tracker layout fits, Xenon for three-phase hybrid investigation, Xerox for on-grid projects, and correctly specified storage to complete the system.
Sources and references
- [1] KNOX FZCO official website: product links to knoxpv.com
Identity corroboration; product links point to knoxpv.com.
Source date: Undated public document. Verified: 2026-10-17.
- [2] KNOX current product catalogue
Current public catalogue listing Zapher, battery and inverter families; no dated launch sequence.
Source date: Undated public document. Verified: 2026-10-17.
- [3] KNOX Zapher 6.6 kW datasheet
Model-specific electrical ratings and operating limits.
Source date: Undated public document. Verified: 2026-10-17.
- [4] KNOX Zapher 9.2 kW and 11.2 kW datasheet
Model-specific electrical ratings and operating limits.
Source date: Undated public document. Verified: 2026-10-17.
- [5] KNOX Zynex 8 and 10 kW datasheet, IP54
ZX-3M-0816/1020; three MPPTs, rated AC apparent power, maximum PV arrays, IP54 and switching time.
Source date: Undated public document. Verified: 2026-10-17.
- [6] KNOX Xenon 18000 and 22500 datasheet
12/15 kW rated output; 18/22.5 kW PV, three phase, nominal 48 V, IP66, two MPPTs.
Source date: Undated public document. Verified: 2026-10-17.
- [7] KNOX Xerox G4 Pro 30 kW datasheet
30 kW active power, 45 kWp PV, three MPPT inputs; on-grid family also checked in official catalogue.
Source date: Undated public document. Verified: 2026-10-17.
- [8] KNOX Powerwall 6.0 datasheet
LIO 5.20-IP20, LiFePO4, 51.2 V, 100 Ah, 5120 Wh, 100 A continuous discharge; conflicting parallel 8/4 text.
Source date: Undated public document. Verified: 2026-10-17.
- [9] KNOX Zapher 6.6 kW product page
Live product listing and mislabeled HTML fields; links to model datasheet.
Source date: Undated public document. Verified: 2026-10-17.